1 / 2
Lack Leg Joiner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built a double height Lack enclosure for my resin printer, this part joins two set of legs vertically
- Ocena
- 4,667 / 5
- Polubienia
- 32
- Pobrania
- 185
- Wydruki
- 3
- Wyświetlenia
- 857
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 10)Remiksy (0)Kolekcje (59)Powiązane
If you have a resin printer and need a good exhausted enclosure for it, you may want to build a Lack enclosure. You'll need more height so 2 Lacks together, joined at the feet so your exhaust fan can be mounted at the top. This part allows you to do that