QIDI X-Plus X-Max Filament Cleaner and Backspin Preventer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament cleaner and backspin preventer for the QIDI X-Plus and X-Max. It was originally designed for one of…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 1128
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
About
This is a filament cleaner and backspin preventer for the QIDI X-Plus and X-Max. It was originally designed for one of my other designs but I never included it there. It should fit all printers using a 6 mm bowden tube as well.
To use, print the two parts. Cut a piece of sponge and place it inside the cylinder. Cut the filament at an angle and thread it through. Screw the two parts together. Place the cylinder over the black filament guide, it should secure itself. You can use it internally like I have done here or anywhere you like.
Next, load the filament in your extruder and you're done.
Support
All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)
https://www.paypal.me/humebeamengineering
Print Settings
Printer:
QIDI Tech X-Max
Rafts:
NoSupports:
No
Resolution:
0.20 mm
Infill: 25%
Filament: Fillamentum ABS Traffic Red
Notes:
Print the parts as I have placed them. You shouldn't need to use supports.
Installation
