Alternate Sim-Lab XP-1 Pedals Control Box Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a easier way to get to the Pedals Control Box
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 804
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
This model allows me to mount the Sim-Lab XP-1 Pedals Control Box on the end of 40 series profile on the pedal deck, instead of the bottom of the pedal deck..
This one-leg old man doesn't get up or down as easy as I use to, so I didn't want to get on the floor and try to connect wires under the pedal deck.
M8 x 16mm cap head screws and t-nut to mount to the 40 series profile.. The counter-bores for the M8 cap heads were modeled to not need any supports(NO SUPPORTS NEEDED)
The part was modeled with M5 threaded holes for mounting control box with the supplied M5 cap head screws… I opened the thread tolerance up a little to make the M5 snug fitting.. Threaded holes are modeled through the whole part, so the control box can be mounted on either side, depending on where you want to mount it on the profile
As always, I included the Fusion360 file along with .3mf file, so you can make changes or contact me for a needed change
Updated the model to include zip tie for USB on both sides(if mounted on the other side