1 / 1
Anycubic Mega LED Light Fixture — zdjęcie 1

Anycubic Mega LED Light Fixture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this fixture to utilize the LED lights that I had on hand.

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
340
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

My lighting in the room where my printers are is inadequate to say the least so I rummaged thru my parts drawers and found a set of 3 LED lights. Next step was to figure out how to attach them to the printer. I tried several different designs to mount lights on my Mega X and decided that this was the best choice for me. The lights are very bright and disk shaped so what I used on my other printers would not work. I decided they needed to be adjustable so I could move their aim point as needed. If you decide to use this design you will need to enable supports.