Leifheit Classic Tower 450 Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the clothes hanger hook for the Leifheit Classic Tower 450 clothes dryer.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed more (and will down the line also need a replacement) for this little addon to the clothes dryer we bought recently. The original part is molded ABS, I printed it in ABS as well. PLA might be too brittle, it should at least be PETG in my mind.
It might not look exactly the same, but I am not concerned with the extra material I use by not tapering the arm. Also the original is hollowed out, likely also to save material. It fits perfectly and allows me to hang more than three dress shirts at the same time!
I printed it with 0.2mm layer heigt, 0.3 would also be fine i suspect. 4 Walls for robustness, 20% infill, takes <90 minutes. All in all I am very happy with my design :-)
Step File included should anyone need to tweak it for a concrete use case.