1 / 4
Qingping Temp & RH Monitor holder with screw hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alternative holder for the sensor "Qingping Temp & RH Monitor (T)" with an additional screw hole.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A holder for the "Qingping Temp & RH Monitor (T)" which is equipped with an additional screw hole for attachments where the glue either does not stick.
A large washer with an inner diameter of at least 8.2mm and an outer diameter of maximum 25.2mm is also required.
The washer must of course be able to be held by a magnet, since the magnet integrated in the sensor is held on this.