Beauty the Cat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a multicolored print of my previous cat. It pins on the Qube 500 as decoration with 2 base single hole mounts...
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I strongly believe that cats make everything better. This is why I challenged my self to make this pin.
It is printed with color changes after 1mm, 2mm and 3mm. Starting with black filament, then switch to orange, next swap to white and then black again.
I have used a MK3S with 0.4mm nozzle and 0.2mm fast settings…
You will also need two base single mounts provided by cooler master. They are glued into the backside. The finished dimensions are circa 21 x 18 cm.
I did have some troubles with the step file provided. My laptop could not handle it. This is why I made a simple sketch of the Qube 500 to showcase my desing.
Alternative you can hang it as a wall art piece . If something is unclear please ask and a make means the world to me. Enjoy :)