OUTDATED - Otto DIY Improved Leg v08.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have improved mounting of the servo to allow screw to be set from the inside. Additionally I reinforced mounting…
- Ocena
- 2 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 337
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
THIS MODEL IS LIKELY OUTDATED - PLEASE VISIT https://www.printables.com/@OttoDIY FOR MORE RECENT VERSIONS
I have improved mounting of the servo to allow screw to be set from the inside. Additionally I reinforced mounting bracket a little bit.
This is based on Otto DIY Leg v08 and should be compatible with current version of Otto DIY and Otto DIY+
Print Settings
Printer:
Prusa i3 MK3
Rafts:
No
Supports:
Doesn't Matter
Infill:
15%
Filament:
[
Hatchbox PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA&tag=thingiverse09-20)
Notes:
I used supports off the bed, and printed it upside down with bigger opening facing up
How I Designed This
Reverse engineered STL in Fusion 360
Category: Robotics