S830 e-bike LCD holder (Samebike LO26)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative, smaller holder for S830 e-bike LCD, used for example on Samebike LO26.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 435
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Alternative, smaller holder for S830 e-bike LCD, used for example on Samebike LO26.
Original holder goes over handlebars and is quite wide.
I made this one so i could more easily fit a phone holder on the bars.
Uses screws from the original holder.
Mounts on the left of the stem but can be mirrored in slicer to mount it on the right.
Printing:
Designed to be printed on the side with no supports, model should be correctly oriented.
3 walls and 20-30% infill should be enough.
I've printed it in matte black PLA but after a while it has cracked near the mounting screw - apparently matte PLA is quite brittle so PETG or ABS might be a better choice.