Painting Turntable / Lazy Susan 250mm Dia.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a large turntable that I use for painting!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1093
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a turntable/lazy susan that I've been using for airbrushing and spray painting. Assembly is simple; get some 6mm ball bearings (I used airsoft bbs), and lubricate them lightly with grease such as white lithium. Fill the round track in the turntable_bot with the lubricated bbs. Set the turntable_top on top of the filled bottom piece. Use a ¼-20 UNC x ½" long flat-head screw to join the two halves together, and DONE!
If you are going to be doing painting on this, I recommend covering the top with some masking tape or painters tape before painting. It's a lot easier to peel off a layer of tape than remove 10 layers of overspray.