1 / 5
Round Raspberry Pi 4 Case for PoE Hat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger version of my Round Pi Case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an alternate version of my round Raspberry Pi 4 Case that supports a Waveshare PoE Hat.
Yes its another round Raspberry Pi 4 Case but this one is inspired by various smart home bridge designs.
Case is designed for PIs used as a server, for example home assistant and pi hole.
Features:
- The bottom part of the original design is compatible and can be re-used
- As you would use your PoE as power supply you don't need the right-angle USB-C adaptor of the original design
- The USB port space is somewhat limited by design as I only intent to use 1-2 USB sticks. I tested it with a Conbee II Zigbee Gateway.
- The case clips together without any screws or glue
What do you need:
- hex standoffs that come with your PoE Hat to mount the pi to the case
- some type of rubber or foam feet
Printing Tip:
use concentric bottom fill pattern for case-top for a beautiful brushed finish