Moka Pot basket holder to stop coffee mess
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bowl that holds your moka pot basket while you fill it, helping to prevent coffee mess.
- Ocena
- 4,917 / 5
- Polubienia
- 70
- Pobrania
- 412
- Wydruki
- 12
- Wyświetlenia
- 1510
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Description: I was getting frustrated by always having to be super careful when filling the basket of my moka pot, so I designed this bowl to hold the basket while you fill it. It is designed so any overflow of coffee goes into the bowl and can easily be poured back into the coffee jar from the bowl. it is an extremely practical and useful print and I use it almost every day so I hope it can be of the same use to you 😁
🛠 Print Settings:
- Time To Print: Approx 2.5 hours
- Layer Height: 0.2mm
- Wall Thickness: 2 walls
- Infill: 15% Rectilinear
- Bottom Layers: 3 layers
- Top Layers: Aim for 3 or 4 top layers for a polished surface.
- Supports: Not needed
- Print Speed: Moderate speed for quality results; adjust to your printer's capabilities.
- Nozzle: 0.6mm or 0.4mm
- Filament: PLA works great, but feel free to explore with different materials and colors.
Two Versions:
- With 10mm diameter silicone bumper feet like these : https://shorturl.at/bgvMU
- Flat base without feet
Durability: I've been using this design, printed in PLA for over two years without any issues. Cleaning is a breeze – just wash with warm water and soap.
Compatibility: The bowl is designed to accommodate a moka pot basket with a 10 - 11mm diameter stem, but you could easily scale the model for a bigger or smaller basket. If you want any design changes just let me know and I will see what I can do.
If you make this please let me know how it works for you or what it looks like in other colours 😁