3D Printable Parkflyer ME109-K
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired from the Thing http://www.thingiverse.com/thing:33102 i wanted to see if it is possible to make an 100% (or…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired from the Thing http://www.thingiverse.com/thing:33102
i wanted to see if it is possible to make an 100% (or so) printed Parkflyer
Started at 1st of Jan evening the maiden Flight wasnt done till 6th due to weather so Build time is netto 20 Hours
Version 00 Just a try to learn and see if it does
Learning after 30Years Modelling changed a lot ;)-
Folies suck 100 times
The guy in the model shop sayed this motor will rip out of the model ,.. so i give it an try and weÂll see then i make it pretty ;)-
Instructions
I made a "long" Documentation but it is (for now ) in German http://www.tkamsker.at/web/pub/3d-druckbarer-parkflyer-me109-k
1.) Simply Print the Parts
2.) Print the Drawings
3.) Glue it Together
4.) Wrap an Folie around it
5.) Adjust Servos and Remotecontrol
6.) Load Akkus and try it
Category: R/C Vehicles