1 / 9
Light Buckets for HPI micro-RS4 Falken Tire Ford Mustang — zdjęcie 1
1 / 9

Light Buckets for HPI micro-RS4 Falken Tire Ford Mustang

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are head- and rear light buckets for the micro-RS4 Ford Mustang from HPI (Justin Pawlaks formula drift car in…

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
343
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

These are head- and rear light buckets for the micro-RS4 Ford Mustang from HPI (Justin Pawlaks formula drift car in Falken Tire livery). They use 4mm square white LED SMD chips for the head lights and 4x3mm red LED chips for the rear lights. I also included versions using 3mm round LEDs for you normies. For the rear lights there are two versions at the moment: Just the bucket (needs the paint to be removed from the inside of the body and a transparent decal to be applied to the outside), and the "occluded" version, for which the contour of the rear light needs to be cut out. Also this rear light then needs tape to be applied to the outside and then be filled with transparent epoxy via the LED hole. I have at this time only tried the bucket-only version.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2.5

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Filament: prusament PLA silver

Category: R/C Vehicles

Tagi