Voron Electronics Mounting Options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various options to mount Raspberry Pi, SKR Pico, Klipper Expander & CanBus UTOC
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 76
- Wydruki
- 2
- Wyświetlenia
- 949
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I ran out of space in my Voron 0, when trying to fit:
- Raspberry Pi
- BTT SKR Pico
- KlipperExpander
- CanBus UTOC (from Mellow), most likely works for BTT too
- Meanwell RS-25-5
- BTT Octopus 1.1
- WAGO 211-415
To organise things better, I've mounted a DIN rail to the back area, so I can move things around if I need to. I've also found som extra places to mount things, so there are three options to mount extra stuff:
- Back area between motors has two extra screws
- Top cover, if it no longer uses an umbilical PCB can mount other stuff
On top of that I found that default DIN clips are too chunky, so I've remixed the Fabian's DIN clip to accomodate Voron's stadart HSI.
You can find the clip here.
Most of the mounts also accept heat set inserts, the dimensions are Voron standart M3x4x5.
The Raspberry mounts have options to place the plate higher or lower, depending on how do you want to organise your cables.