2" hitch silencer (spacer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spacer for a 2" trailer hitch to put some pressure against the hitch and receiver so it doesn't rattle as…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a spacer for a 2" trailer hitch to put some pressure against the hitch and receiver so it doesn't rattle as much. This doesn't take away the shaking COMPLETELY, but it is enough to make it not shake going over normal bumps and terrain. I've also included the Fusion 360 model in case you want to make a single thicker one, you just have to go to the extrusion and make it as thick as you want.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Filament: Hatchbox PLA Blue
Notes:
This has sizes from 1mm to 6mm. You can print as many as you need to put between the hitch and receiver to make a snug fit.
Category: Automotive