1 / 6
Jank Junko Soldering Iron Station T-12
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i saw a standard Soldering station and i modified it to fit my "smart Soldering Iron" with T-12 tips
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Simple Station for my JV100 Soldering Iron. added some spots to hold some extra stuff. the spring/ iron holder i got from my old Weller WLC100. Im sure you can use almost any holder that is like the weller ones.
I reccomend these Print Setting (prusa):
0.6mm Nozzle
0.36mm Profile (not modified)
Gyroid Infill 5-10% (you can have more but it will take a while to print)
2 walls
3 top
3 bottom
support either Snug or organic
keep support interface light
The rest ill leave up to you