1 / 4
1/12 scale standard dressform and pants dressform — zdjęcie 1
1 / 4

1/12 scale standard dressform and pants dressform

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1/12 scale standard dressform and pants dressform

Ocena
5 / 5
Polubienia
193
Pobrania
410
Wydruki
0
Wyświetlenia
1919
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Standard and pants dressforms for 1/12 scale dolls! These were designed based on measurements for the Nendoroid doll bodies, because Good Smile publishes extensive measurements and those are also the ones I happen to own, but clothes for most of the similarly-sized 1/12 dolls such as Obitsu 11 and Piccodo 10 should also fit. The main diffence between the m (male) and f (female) bodies is that the female one has very slightly narrower shoulders, and a more prominent bust.

The parts are designed to friction-fit, though given the very small measurements involved, you may need to use a spot of super glue or do some light sanding depending on your machine tolerances. Recomended print settings:
- no supports necessary
- layer height 0f 0.2mm or smaller
- 5% infill
- slicing tolerance set to 'exclusive'
- whatever settings necessary to prevent elephant's foot - the parts have a small built-in chamfer but it may not be enough. I've had good results with 'Initial Layer Horizontal Expansion' set to -0.2mm

Also, if you want to use a woodfill PLA like the samples are printed in, I found this guide to be super-helpful for minimizing stringing: https://www.davidgunter.com/2021/12/18/3d-printing-with-wood-fiber-pla/

For the standard dressform, you will need:
- 1x base1
- 1x base2
- 1x pole-long
- 1x m-dress or 1x f-dress

For the pants dressform you will need:
- 2x base1
- 1x base2-double
- 2x pole-short
- 1x m-pants or 1x f-pants

Note that the center pole fit on the pants dressforms are looser than the standard ones - this is intentional, as it needs to be taken off the base to put different pants on it.

Tagi