Replacement strap for Tissot T-Touch II watch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement strap for Tissot T-Touch (orig. and Touch II) watch modeled after the original black rubber strap version.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Public Domain
A replacement strap for Tissot T-Touch II watch modeled after the original black rubber strap version. Apparently this also fits the older T-Touch model (based on make/comment).
My original rubber strap broke from the end where it connects to the metal clasp mechanism so I modeled a replacement part for the rubber (one side) and printed it in TPU.
The original strap is a bit longer with cutting lines to trim it to correct length as needed for your wrist thickness. I was a bit lazy and modeled this only up to the length I needed for myself but it shouldn't be too difficult to edit this to extend the length and add more pin holes if needed. Feel free to make a remix using the supplied F3D or STEP files if you like.
Printing
Print from a flexible material like TPU. You may need to tune extrusion multiplier to make sure the pin holes are not too tight so you can connect the strap using the original metal hardware.
Depending on the hardness of your flexible filament, you may want to play with different amounts of walls and infill to adjust the flexibility of the end result.