1 / 5
Enclosure  for RPM-Meter — zdjęcie 1
1 / 5

Enclosure for RPM-Meter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

with Arduino Nano and IR-Sensor-Module for OPtimill BF16

Ocena
0 / 5
Polubienia
8
Pobrania
31
Wydruki
0
Wyświetlenia
365
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple Enclosure for Arduino Nano RPM-Meter with TM1637 4 digit diplay for my Optimill BF 16 Vario.

The small block “Sensorplate” is  used to place the sensor in the correct height  to measure the spindle speed (RPM). A small bright strip (electric tape) has to be placed on the spindle for changing the sensor output to count revolutions per minute. 

Main components:

Arduino Nano

IR-Sensor Module

TM1637 Display Module

Information, Code and Wiring:

https://www.instructables.com/DIY-Tachometer-RPM-Meter/

Tagi