Tesla Windshield Washer Hose Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to hold Hose in place on Wiper Arm
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 476
- Wydruki
- 1
- Wyświetlenia
- 2567
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is an OpenSCAD (https://openscad.org/) script to create a replacement
windshield washer hose clip for a 2018 Tesla Model 3. After 5 years in the
Phoenix sun, the plastic clips that hold the washer hose in place on the
wiper arm broke - causing the hose to flop around while driving. Unfortunately,
Tesla only sells the entire wiper arm, not just the clips - which seemed a bit
unnecessary.
Small modifications to the parameters in the file can allow it to be used for other vehicles also.
Print in a high-temperature, UV resistant filament like PETG or ABS. PLA will simply melt in the sun, at least in my corner of the world. I used a 0.4mm nozzle with 0.2 or 0.3mm layer heights, and printed solid.
Feel free to print in matte black to match the wiper arm, or a color of your choice. KVP Voron Red ABS isn't a perfect match to my car, but it's close enough for me and adds just a bit of flair to the wipers.