1 / 6
ARRMA 40mm Motor - 4010 & 4020 dual fan mount (for RC cars) — zdjęcie 1
1 / 6

ARRMA 40mm Motor - 4010 & 4020 dual fan mount (for RC cars)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip to mount dual 4010 or 4020 fan on a 40mmØ ARRMA motor, and secured with zip ties

Ocena
0 / 5
Polubienia
30
Pobrania
148
Wydruki
0
Wyświetlenia
983
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For a ARRMA 40mmØ motor (62mm long) fan mount used in some remote controlled cars. dual 4010 and dual 4020 mount

Print should not need any print support. PETG or better for the clip part, since I assume it's on a hot motor.

Clip itself is 62mm from end to end for 40mmØ ARRMA motor

Overall width is about 84mm

Overall height is about 55mm

Depth from motor surface to front cover is about 28mm for the 4010 model, 38mm for the 4020 model.
 

Screws for the 4010 fan model:

4x M3x16 (to secure the fans to the clip)

8x M3x20 (to secure the cover to the clip)
 

Screws for the 4020 fan model:

4x M3x25 (to secure the fans to the clip)

8x M3x30 (to secure the cover to the clip)
 

Thread heat inserts:

12x M3 4mm(length) 5mm(diameter)

OR

12x M3 4mm(length) 4.6mm(diameter)
 


------
Support me by buying the STEP file here

Support me on Patreon!

https://patreon.com/squirrelf3d

Buy me a coffee
https://ko-fi.com/squirrelf3d
https://www.buymeacoffee.com/squirrelf

------

https://instagram.com/squirrelf3d/
https://twitter.com/squirrelf3d


 

Tagi