1 / 3
Smaller clip REMIX of "sleek chip clip" — zdjęcie 1
1 / 3

Smaller clip REMIX of "sleek chip clip"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scaled down versions of the original while maintaining an appropriate tooth spacing.

Ocena
5 / 5
Polubienia
25
Pobrania
346
Wydruki
5
Wyświetlenia
969
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I liked the original clip, but found it to be bigger than my needs. You can not simply scale down the model and print naively, since this will also scale down the size of the spacing between the prints, resulting in a fused print. My STL files are for the same clip at 50% and 70% of the original size, while maintaining an approximately .4 mm gap between the teeth. 

Even with a .4 mm gap between the teeth of each model, I still needed to pop mine apart first before using.

Tagi