Kobalt 1/2 XTR Impact Directional Selector (F/R Switch Button)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a forward reverse switch for the Kobalt 1/2 inch XTR large impact driver.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is an unobtainable replacement part for the Kobalt XTR impact driver. I found one of these expensive impacts one day for a great deal because it was missing this selector switch. I bought it thinking I could buy a replacement piece and fix it myself, but I could not. So, after a few attempts I designed this one to replace it. It not perfect but it is close enough that a little sanding should get you in the right place.
The only tool I know this will work for is the XTR impact (Model KXIW 124B-03) but it may work for other Kobalt impacts and tools
I printed this out PLA, but you may want to print it out of PETG for a little more strength, heat resistance, and flexibility
I printed at 100% infill for plenty of strength but 50% would probably be fine.
No supports are needed