DSQ-1 – KORG SQ-1 SEQUENCER EURORACK MOUNTING FRAME
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. The frame can be also ordered at…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 1385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. The frame can be also ordered at https://www.spillerphoto.com
For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required.
Easy assembly
Remove the batteries
Loosen the thin plastic film on one side which is holding the battery holder in place
Unscrew the 4 front screws
Remove the back and pull the battery holder through the back, that the back can be put aside
Slide the mounting frame in
Use the 4 screws from the front to fix the mounting frame
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
Yes
0,2
Infill:
20%
Filament:
Colorfabb PLA black
Category: Music