1 / 5
120mm Fan Tray for HP OMEN Obelisk — zdjęcie 1
1 / 5

120mm Fan Tray for HP OMEN Obelisk

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tray style mount for adding an additional 120mm fan to the HP OMEN Obelisk Gaming Desktop Computer (875-0000).

Ocena
0 / 5
Polubienia
6
Pobrania
48
Wydruki
0
Wyświetlenia
395
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I'm trying to extend the life of my old HP OMEN Obelisk Gaming computer (875-0000).  I previously created pedestals to raise the computer off of the floor/surface, and now I'm finally taking advantage of that added space by adding an additional input fan to help improve cooling.

I have designed a tray style fan mount to fit onto the dust filter covering the lower vents on the computer case.  It is designed to adapt a 120mm fan (I used a Noctua NF-P12 redux) to the size of the filter/vent.  There are holes at 105mm spacing for M3 screws to mount the fan to the tray.  The holes are 5mm deep and the screws thread into the plastic.  For the NF-P12 I used 30mm screws and washers.  The tray then sits on the filter element and the sides have been relieved to fit the handles on the sides of the filter.  One side also has deeper pockets to accommodate the filter hold down tabs on the computer.  There is a notch to ease cable routing/strain relief, and the tray is tapered as to not obstruct the airflow into the computer power supply.

I printed it in PETG with a 0.6mm nozzle using the 0.35mm FAST profile.

Tagi