Tears of The Kingdom Wireframe Master Sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
idk I just decided to make a master sword based off of the green dragon looking thingy on the box art
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm planning on building this and upload a guide thing to youtube, so if I do I'll update this with a link.
to print this yourself, you need to print out anything that says half in the name twice, print the pin 3 times (you wont need any pins for the uncut version), and all of the other parts are only printed once. (also scale the handle to what's comfortable, save it somewhere and make sure to scale all of the parts with the same multiplier (including the pins)
When assembling the sword, slot both blade bases into the guard, and glue them together, then put a pin in the hole at the top of the blade base, and slot in the blade, and glue that, then glue a pin in the slot of the pommel (little bit that goes on the bottom of the handle), and glue that to the handle, then glue the last pin in the handle, and gle that to the top of the handle, making sure to rotate it so that the guard and the design on the bottom align, then glue the full handle to the guard. After the sword is glued together, arrange all of the dragon bits as shown in the images, and glue those inside the holes at the end of the blade.
(for the eye, I'm planning on using fishing line, or something similar (and clear) to wrap in the little notches I cut at the bottom, top and side of the eye)
EDIT: I scaled the sword up by 743% so the handle is roughly 13 cm long, and from the handle to the end of the blade it's roughly 97 cm long