1 / 2
Bambu Lab Waste Bucket 10mm Dia Magnet. Hanger with 3mm through hole.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See Description
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A nice Juicy print with standard 0.2mm nozzle settings. Just black PLA. Print bucket vertically. I used a little bit of support on the hanger. I'm not sure if you need it, but I use it.