1 / 1
Wall Control DDD 3x6 center peice 12 hole leather working tool holder — zdjęcie 1

Wall Control DDD 3x6 center peice 12 hole leather working tool holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 3x6 Center piece intended for use with Wall Control (https://www.wallcontrol.com/) metal pegboards and the DDD

Ocena
0 / 5
Polubienia
26
Pobrania
74
Wydruki
0
Wyświetlenia
704
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

This is a 3x6 Center piece intended for use with Wall Control (https://www.wallcontrol.com/) metal pegboards and the DDD Printable Wall Control System (https://github.com/aderusha/DDD-Printable-Wall-Control-System).

in the DDD System this is a 3x6 Centerpiece.

It has 12 holes for hand tools. The upper hole is 14mm diameter and the lower hole is 7mm so the tools should stay upright.

My specific use case is leather working tools.

Rotate 90 to ensure the side pegs are flat on the print base.  No supports needed.

Tagi