Twice lightstick Candybong infinite table clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table clamp for official Twice lightstick Candybong infinite.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 725
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Table clamp for official Twice lightstick Candybong infinite.
Made as an extension and modification of Modular Desk Mount.
Currently made for 22mm thick table. Adjustments should be simple enough to make in 3D builder or I can adjust table clamp for different thickness table.
Other lightsticks can be accomodated as well but I would need to know the diameter of the handle to make adjustments.
Parts should be in the correct orientation for printing. No supports required.
PLA is good enough material for this. Tolerances can be a bit tight if they are try a bit of sanding or just forcefully put parts together.