1 / 5
Lid to improve usage of Hornady handheld priming tool — zdjęcie 1
1 / 5

Lid to improve usage of Hornady handheld priming tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesigned lid of priming tool, to avoid primers get stuck

Ocena
0 / 5
Polubienia
9
Pobrania
40
Wydruki
0
Wyświetlenia
348
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original lid that comes with Hornady's handheld priming tool doesn't work as expected. Primers get stuck inside the container, and not moving into the tool after each stroke. This is because lid doesn't have guides to allow primers to move toward the correct direction. So I redesigned the lid, added those guides and also improved latches that keep container and lid together (original ones are too week and prone to break). The only setback is printed material is not transparent as original, so I added some “windows” to watch primers moving. I hope reloaders that use this tool get improvements on the priming process. Sketchup model is added, in case someone wants to add changes. Hornady's engineers: keep these changes in mind for the next version of this product.

 

Printing parameters:

  • Resolution: 0.2 mm
  • Perimeters: 3
  • Infill: 20%
  • Supports: only below latches' overhangs
If you download this model and it is useful for you, please leave a like and upload your make so I can earn some Prusameters. I will really appreciate it!!

Tagi