Dell Chromebook Key (3100 2-in-1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and easy print to replace To my knowledge any Chromebook key
- Ocena
- 2 / 5
- Polubienia
- 12
- Pobrania
- 417
- Wydruki
- 1
- Wyświetlenia
- 1863
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
My friend uses a Chromebook and his quote key ( " ) fell off somewhere. This key can replace any of the main square keys. Feel free to remix and add letters to replace specific key or fix to your size. Also works with any computer that uses 15 by 15mm keys with a 2.2 mm thickness. This is a quick print and took 15 minutes at .1mm layer height, supports and 45/mms on my Ender 3 S1
Happy printing!
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
Yes
Resolution:
.1
Infill:
100
Filament: Inland PLA White
Notes:
I only had white on hand so I colored it with Sharpie to blend in. Use supports and print in the orientation the .stl file is in unless you prefer otherwise. I used default supports in Cura and it worked just fine. SLOW DOWN YOUR PRINT SPEED: for me, since I am using an i3 bed slinger (anything like an Ender 3) I reduced speed from 55mm/s to 40mm/s to get better layer adhesion and quality.
Post-Printing =============
Be sure to be careful when removing the supports. When you are happy with the removal of supports click the key into the missing spot on your computer. Don't be to harsh on it but my friend has used this for the past month and has had no issues.
Category: Computer