Kitchenaid Attachment Port Models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These two parts used to build an attachment connecting to the front optional attachment port on a Kitchenaid mixer
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 911
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I have been working on building a candy panning machine for coating gummies, nuts, etc. While searching, I came across a youtube video that referenced the below reference models to build a cheap candy panning machine build from items found around the home.
These two parts are used to build an attachment that connects to the front optional attachment port on a Kitchen-aid mixer while the other end is attached to a stainless steel bowl. This uses the controls and motors of the mixer to spin a bowl for applying chocolate and wax to candy or nuts. The bowl should be spin at a 30 degree angle when in use.
I have taken my designs from two existing 3D model of KichenAid_Adapter_Bearing_Housing_39958 and KitchenAid_to_Milescraft_adapter_8_431064 found here on Thingaverse. I have rebuilt them from scratch using these models as inspiration only using Fusion360. There are no supports needed when printing either model.