1 / 1
Temp Tower Torture Test 35mm X 5mm X 5mm stack of 6
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
35mm X 5mm X 5mm stack of 6 Is labeled at 220 then +10 for each level
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
A temp tower I knocked up with temperature markings.
The part has the following dimensions
35 x 5 x 5 mm overall
3mm hole through the center
4mm counter-sunk hole with 3x3mm cone with 40 deg included angle
2mm rads under bridge with 10mm rad at the end of the part
0.5mm chamfers plus 2 x 2.5mm chamfers
Text is 0.33mm deep
0.5mm walls around the 4mm counter bore
1mm walls through the cone pocket windows
R2's on bridge pillar
0.25mm overhang of bridge pillar