Pushrod Holder for Small Block Ford V8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Block to hold 16 pushrods while I'm working on the engine.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
My old Ford 302 V8 needs new head gaskets, which means the heads have to come off, and to keep the pushrods from just rolling around the garage I decided to make a holder to keep them corraled. I'm too lazy to drill 16 holes in a wood block, so I designed this in TinkerCad and printed it on my AnkerMake M5C. It's just a rectangular block with 16 hollow cylinders in it. Designed for pushrods up to about 9.5mm in diameter - if you need a different size, you can scale it accordingly. I labeled the front using PrusaSlicer's new text feature so I could put the rods back in the same positions.
TinkerCad seems to have lost the design somehow, so I'm not able to share a link to it.