GoPro 9 Protective Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective case for GoPro Hero 9, 10, 11 and 12. Go check out V2!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
-+- There are five cases and two lids: -+-
All cases have the same form factor and fit the GoPro Hero 9. Choose one (or all if you want):
- Fox
- Fox head
- Bird
- phoenix
- No figure
The case uses the GoPro tabs to stay in place, but the lid has a small latch for redundancy. There are two versions of the lid. Choose one (or both if you want):
- Lid showing the screen
- Lid fully covering the screen
-+- You need one of each following item: -+-
- Case
- Lid
- M5 screw with a minimum length of 30 mm
- M5 locking nut and/or glue
-+- Printing settings: -+-
- 100% infill
- Layer height/Quality: 0.1 mm (0.4 mm nozzle)
- Use support
- Use brim to avoid warping
- Lid: Oriented laying down. Hinge and latch up (Use support)
- Case: Oriented camera facing down (Use support)
- This way you get a clean surface on the inside of the case
=+= If you liked this model =+=
Check out version 2 with even better lens protection!
https://www.printables.com/model/983542-gopro-12-protective-case
-+- Case figures based closely on: -+-
- Fox by Nirmla
- Fox head by Michael
- Bird by Jakir Hossen
- Phoenix by idesign2000
=#= Extra files =#=
I have added the original Autodesk Inventor files (.ipt)
- Case_Autodesk_Inventor
- Lid_Autodesk_Inventor
Please feel free to remix and re-upload, but be aware: The tolerances on the original files are too tight and need to be scaled to 101% before converting to a printable file (.stl)