Deebot N79 Replacement Brush Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the Deebot N79 brush head. Print in place with supports with brushes facing up.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This is a rendered interpretation of the Deebot N79 Brush Head, of which there are 2 on the Deebot N79 unit.
I printed with the smaller end sticking down and 10% criss-cross line supports.
Print Settings
Printer brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
.18
Infill:
20
Notes:
I used .18mm layers, but you can probably get away with larger. I used ABS to print this, and in Cura I scale everything to 103% when printing in ABS on my printer. TAZ 5
Post-Printing
Just clean up any strings and be on your way. You're probably going to want to add bristles! I recommend hot glue and stiff nylon fibers, possibly from a broom