18650 battery tube enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edited the original's 18650 models in tinkercad to add room for battery contact wires. Also added + and - labelling. I…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Edited the original's 18650 models in tinkercad to add room for battery contact wires. Also added + and - labelling. I used little magnets as battery contacts in mine.
Tinkercad model: https://www.tinkercad.com/things/atBxP65iEcd
I printed mine with MonoPrice black PLA, it was pretty stringy and I had to clean out the hole openings on the bottom with a drill bit as well as scrape out the channel for the wire with a little pick tool. Battery's fit isvery snug with the wire in there!
Category: Electronics