VW B7 (NMS) Passat Trunk Hinge Cap (updated 2026)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cap to create a clean look on a B7 (NMS) Passat trunk hinge
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 1143
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Quite simply, a cap for the ends of the trunk hinges on a Volkswagen B7 NMS Passat, 2012—2019 (fit on a 2018).
This cap is a quick print to provide a clean finished look in a place most people will not see. Car enthusiasts will get it.
Update
A v2 file has been added with a slight modification to trunk lid spacing and the addition of the VW logo (original style to match a B7), because why not.
2026 Update
I've included an .3mf (created in Elegoo Slicer for CC2) for AMS printing. The results speak for themselves. I also printed it in PETG for more heat resistance. Given the time required to print vs cost vs difficulty, I'm not sure going ASA is really worth the hassle. Dealer's choice, as always! Anyhow, enjoy, if there are any questions, feel free to send a message!
Printing Details
100% infill
4 walls to decrease print time
Supports on
Generic PLA
2 required, one for each side