Scabbard for Glamdring (Gandalf's Sword)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modeled from scratch based on a picture of movie prop replica. Compatible with tolgaaxu's Glamdring model.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 331
- Wydruki
- 2
- Wyświetlenia
- 1472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Compatible with tolgaaxu's Glamdring model available at https://www.cgtrader.com/products/gandalf-glamdring-sword-the-hobbit
Printed on the Bambu X1 Carbon at .1mm using dark blue inland PLA+ and generic silver silk PLA. I used epoxy to connect the blue parts and ran string through to hold it in place while the glue dried. I recommend using something flat while it's setting to prevent the scabbard from being curved. The locket and chape don't need to be glued, they will stay securely in place and can easily be replaced if they break.
The top and bottom liner connectors are used to hold an inner liner so the sword doesn't get get scratched (I used pantyhose). the connectors have a groove to secure the liner in place. Super glue the part that connects to the scabbard first, then set the liner in place and glue the other connector on top. Once it's been glued in place, the excess can be cut off. This may be ugly but it's effective and it will all be hidden once it's assembled. I had some trouble printing the top connectors since they require supports and they're so thin. They ended up breaking but they can still be glued in place in pieces and it works just as well.