Adjustable Telescope Eyepiece Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully adjustable eyepiece phone mount. Credit to @MaOl for original creation, remade model myself with many tweaks.
- Ocena
- 4,889 / 5
- Polubienia
- 118
- Pobrania
- 962
- Wydruki
- 9
- Wyświetlenia
- 4496
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Link to @MaOI's model:
https://www.printables.com/model/230901-mobile-phone-telescope-adapter
I tried a few different phone mounts for my telescope (Apertura AD8 dobsonian), and couldn't get any of them to work well with my setup. The best one I found was by @MaOl, massive thanks to them. Their mount was really good, with great concepts, but didn't work for me. The rail that the eyepiece clamp mounted too was way too long to fit my scope, and the M5 hardware I used wasn't really compatible. The eyepiece clamp was also much too big for standard 1.25" eyepieces.
I didn't have any design files, and there were a lot of minor tweaks I wanted, so I remade it completely to fit my hardware, using no original files. I removed the internal barrier on the phone rail, so if your camera was far to one side, the eyepiece didn't have to sit super far over. The new nut holes are ~8mm wide, and 4mm deep, should fit almost all M5 nuts, and I flipped a few of them (the rail for the clamps also fits the nuts and holds them). I also made the clamps bigger to fit bigger phones with thick cases, like mine, and a few other tweaks for stability.
Hope this works well for someone. Print everything with supports, print 2x clamps. Print the eyepiece mount size you need.
You will need:
2x M5x12 bolts
2x M5x20 bolts
4x M5 nuts
Reference photos for assembly.
STEP files are also included.
EDIT: 2" Eyepiece clamp added!