Compact self-contained hydroponic system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pot, a water tank and a sprinkler. Simple as that. (well, almost)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Simple hydroponic system consists of water tank with nutrient solution, pot with grow media sitting on top and a usb-powered water pump connected to a sprinkler. Watering is automated by using simple timer or smart socket. Printed with PETG filament.
You'll need water pump, 6 mm inner diameter tubing and timer / smart switch/socket.
As a grow media i'm using LECA pebbles and nutrient solution is made from General Hydroponics/Terra Aquatica two-part nutrients.
Pot suggested print settings:
0.25mm layer height
0.8 line width
0 top/bottom layers
20% gyroid infill
5 perimeters up until 6mm height, then 1 perimeter. (see screenshot)
Tank suggested print settings:
0.25 layer height
0.8 line width
5 perimeters
0.8 line width
Make sure you get solid bottom.
Sprinkler suggested print settings:
0.25 layer height
3 perimeters
0.55 line width
Layer height modifiers at 1-1.25 and 10.75-11.50 mm - Ironing on all solid surfaces. (see screenshot)
Don't use plain water without nutrients.
Don't use chlorine-treated tap water.
Plants will need light source.