Filament Sleeve for Hex Reusable Spool Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reusable sleeve that is similar to the cardboard sleeve you get on the Bambu Lab filament refills.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this sleeve to allow for filament to be swapped between different spools. This has helped because you no longer have to print a full spool to have filament stored. It also allows you to swap spooled filament to another spool that may be more tolerant to higher heats for filament drying. This is meant to function like the cardboard that the Bambu Lab filament refills come on. In my testing, these work on the Hex Spool Remix as well as the stock Bambu Lab spools. This also has the key, so your filament is locked in place on the spool.
Print Settings:
- 0.28mm layer height
- 10% infill (line pattern)
- No supports needed
- Print with the keyed side up
- No brim (as needed, I am printing on PEI plate and I am having no adhesion problems)
- 2 wall loops
- Arachne wall generator (I only use this because it's my default, classic works just as well in this case)
I have printed mine in PLA, PETG and ASA. Most of mine are PLA because I don't have many filaments that need to be dried. Personally I don't use the PETG one often because the ASA is more durable and has a higher temperature resistance. If you are going to be using this with a filament dryer, I recommend printing in something like ASA so you don't have the sleeve warp.