Royal Enfield Scram 411 speedometer top case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend of mine had an accident when driving and fortunately i could print him some parts like this! Model: Scram 411
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 802
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This lid was printed with PLA, however, i recommend using PETg or ABS cause its going to bend up when sunlight hits on it. My friend wanted it to look exactly as the original part was so he sanded it up and then did it a paint job. Despite the fact that you may want to sand it too, i think it would be nice to print it on a 0.15 layer height because it will make your sanding job easier. When it comes to the assemble, everything fit perfect but we decided to use silicone for the joins because rain could leak into the speedometer. I hope you never need to print this part but in case you do, you can ask me everything you want!
Happy printing!