VEX Robotics Competition Ref Tool 2023-2024 Over Under
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tool for referees for the 2023-2024 VRC game Over Under.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a tool for referees for the 2023-2024 VRC game Over Under.
With it referees can measure:
- The height of the horizontal goal bars to ensure they are above the minimum specification (5.78") and below the maximum specification (6.03")
- The thickness of plastic on robots to ensure it is within the legal thickness (max 0.07")
- The thickness of string/rope on robots to ensure it is within the legal thickness (max 0.25")
- The length of screws to ensure they are within the legal length (max 2.5")
It also comes with a handy belt hook so you can carry it around easily.
The slots for polycarbonate and string are both oversized by a small amount (0.01") to account for inaccuracy while printing. Assuming you print it in the recommended orientation, these should allow any legal width object to fit. Still, you should verify that these slots do indeed have the correct dimensions yourself after printing.
Printing Instructions:
The orientation that the tool is printed has an effect on the accuracy of the measurements, therefore you should print this such that the text that says “Print this way up” on the back is oriented normally, and that the arrows are pointing upwards.