1 / 2
Curved Plant Hanger/Hook
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple plant hanger, with two support beams and a gap inbetween, to allow the use of a screwdriver :)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A strong plant hanger with nice support and is fairly easy to print. Just lay it on It's side and allow your slicer to form supports on the print. Hence, the two support frames of the print support each other. Through the curve on the hook part, there is less strain if you are for example using string to hang your plant, as the weight is not focused on two edges.
