MK4 LoveBoard Cover Right Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification for MK4 LoveBoard Cover right to solve x axis calibration failure.
- Ocena
- 4,571 / 5
- Polubienia
- 29
- Pobrania
- 171
- Wydruki
- 7
- Wyświetlenia
- 1599
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Standard Digital File License
I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no success. Without the cover, test passed successfully.
I managed to solve x axis calibration failure by redesigning love board cover and now it passes x axis calibration without any issue. If you have similar issue you can try print this version.
There are two files versions:
- With MK4 logo.
- Without MK4 logo.
I printed with PETG, while logo side is facing the bed. 0.20mm Structural profile. Supports are required.