DemiLich Skull Mask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skullmask for Halloween, PnP eg.
- Ocena
- 5 / 5
- Polubienia
- 1109
- Pobrania
- 4113
- Wydruki
- 23
- Wyświetlenia
- 17 208
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Share Alike
Skullmask for Halloween or Pen and Paper eg.
Updated the mask for less material usage. Feel free to comment if it worked!
→ SkullMask_v2
I would strongly recommend printing the mask as one, even if it takes longer to print. I didnt trust my printer (because quite new) and printed it with the different parts. The part version isnt updated and still uses more material.
Want to leave a tip? https://ko-fi.com/assassinmaniac
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Supports:
Yes
Resolution:
24mm
Infill:
15
Filament:
White Post-Printing for part print =============
I had to modify the mask and cut of a few parts because it was too narrow at the base.
The parts were glued and the created gaps filled with greenstuff.
Afterwards I used black primer followed by white primer.
Category: Hobby