Stabilizer Mounts for Ender 3 S1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to add stabilizer bars to an Ender 3 S1 Pro.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts to add stabilizer bars to an Ender 3 S1 Pro. I have a semi enclosure for my printer, so I removed the led bar and created brackets to screw it to the top of my enclosure, that freed up space to add mounts to the gantry for stabilizer bars.
The models are for the right side, to print the left side mounts simply mirror the object in your slicer across the x-axis. Both mounts need to be printed with the side facing down on the print bed. Top mounts only need support for the single side screw hole. Bottom mounts can be printed without supports. I have added the full Fusion 360 files so you can adjust them if needed. If you'd want you could adjust the top mounts so they would work with the led bar.
I used M10 bars as stabilizer rods.