Target that turns on the Qube 500
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for the Qube 500 PC case. Target that when hit turns on the computer, includes safety and a flexible filament part.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning: I am unable to test the print on the actual case so I cannot ensure that no damage will come to the button or any other part.
V1.1 slight modification to make the top clips work better
V1.2 added 2 variations of the target, one for multicolor printers the other for no extra colors
How to print
I printed everything at 0.3 layer height.
Nerf_Target-Left and Right: Print at 10% infill.
Nerf_Target-main: Print at 20% infill.
Nerf_Target-Color_rings: Print at 100% infill.
Optional:
Nerf_Target-Safety: Any infill as long as the Top Layers come out fine.
Nerf_Target-Safety-Holder: Is a bit of a difficult model may need some supports.
Button-protecting-sleeve: print at a lower infill for more shock absorption, print from flexible filament.
Assembly
1. Insert the color rings into the target, you should use glue to ensure it doesn't fall out.
2. Put the target axis into the left and right parts so that the extrusion on the right part is facing inwards.
3. Attach the four clip to the case as in the picture.
4. Shoot away!
Optional steps
Button protection:
Button-protecting-sleeve: To attach, slide it on the part that comes in contact with the button.
Safety:
- To use slide in the safety hole or into the holder.
- To attach the holder put it into one of the double holes.